You are using an unsupported browser. Please update your browser to the latest version on or before July 31, 2020.
close
Home > Access It! > Hardware > Configuring Paired IN/OUT Readers in Access It!
Configuring Paired IN/OUT Readers in Access It!
print icon

Overview

This article outlines the steps to configure Paired readers, (IN/OUT), to allow two readers to control the same door strike.

Configuring Readers

  1. Expand SCPs, (alternatively, you can select the reader from the Installed Readers section)
  2. Expand the specific SCP
  3. Select Readers
  4. Edit the reader
  5. For the desired IN reader - within the General tab, set Access configuration to Paired - IN
  6. Set OUT reader to the desired OUT reader
  7. Click Save

scroll to top icon