Oct 13, 2020
This article outlines setting up MR-20 Magstripe With Keypad with Access It! Universal.NET.
Reader Settings
Within the reader settings tab of the reader, choose a reader type of Magstripe with MR-20 Keypad.
- From the File menu, select Go | Main | Hardware
- Select Installed Readers from the left hand menu
- Edit the MR-20 Reader
- Select the Reader Settings tab
- Set Reader Type to Magstripe with MR-20 Keypad.
- Click Save
MR-20 Reader
On the MR-20 Reader, confirm the S3 dip switches are set correctly to ensure the following mode:
Default 8 Bit Keypad Mode: S3-4 DIP ON
S3-4 |
S3-3 |
S3-2 |
S3-1 |
Description |
X |
X |
X |
X |
Set to ON. Reserved for future use. |
X |
X |
X |
X |
Set to ON. Reserved for future use. |
X |
X |
X |
X |
Set to ON. Reserved for future use. |
ON |
X |
X |
X |
Standard mode, 8-bit ASCII |
OFF |
X |
X |
X |
8-bit mode, 4-bit key code and its 4-bit compliment |